Only $59.00! TODAY ONLY! Click Here for More Info (Save 50% = $50 Savings)

Home / Order Web Machinist  Site Map  Software    Contact / Special Deal / Upgrade   /FAQ’s  Tutorials  Machining Formulas

Favorite Links:

WebMachinist.net SpurGearCalculator.com BluePlanetProducts.Net  TruePositionCalculator.Com MachinistCalculators.com PeckDrilling.com MachiningFormulas.com

Order Page

Machining Formulas Reference Guide

In the Machining Formulas Reference Guide included in the Web Machinist program (bottom), Formulas are provided for Cutting Speed Formulas, Degrees Conversion Formulas, Drill Point Depth Formulas, Feed Rate Formulas, Metal Removal Formulas, Tapping Formulas and a True Position Formula.  Each Formulas Section also has a built in calculator related to the formulas provided (see below)  Above is the Cutting Speed Formulas Section.

Order Page

The Web Machinist Software (above) can be Purchased Here

View My Stats

Above is the Degrees Conversions Formulas Section. It covers converting Minutes of a Degree to a Decimal, Converting Minutes and Seconds of a Degree to a Decimal, Converting Decimal Degrees to Minutes, Converting Decimal Degrees to Minutes and Seconds, Converting Degrees to Radians and Converting Radians to Degrees.

Order Page Order Page

Each Formula Section has a Calculator related to the formulas.

Order Page Order Page

Above is the Drill Point Depth Formulas Section. It covers 60 Degree Drill Point Angle, 82 Degree Drill Point Angle, 90 Degree Drill Point Angle, 118 Degree Drill Point Angle, 120 Degree Drill Point Angle, 135 Degree Drill Point Angle and Custom Drill Point Angles when using the Calculator.

Order Page

Above is the Feed Rate Formulas Section. It covers Inches per Minute, Feed per Revolution, converting Inches per Revolution to Inches per Minute, converting Inches per Minute to Inches per Revolution, converting Inches per Revolution to Millimeters per Revolution, converting Inches per Minute to Inches per Tooth, converting Inches per Tooth to Inches per Minute, converting Inches per Tooth to Inches per Revolution, converting Inches per Revolution to Inches per Tooth.

Order Page

Above is the Metal Removal Rate Formulas Section. It covers Time Cutting in Minutes, Time Cutting in Seconds, Cutting Distance Over Time in Minutes and Metal Removal Rate.

Order Page

Above is the Tapping Formulas Section. It covers Basic Major Diameter of a Thread, Calculating Tap Drill Size for Metric Cutting Taps, Calculating Tap Drill Size for Inch Roll Forming Taps, Calculating Tap Drill Size for Metric Roll Forming Taps.



Order Page

Above is the True Position Formula Section.

Advertisers: